Imagine this: You have just finished a laundry load on a Tuesday night in Toronto. The washing machine groaned during the spin cycle and then there was nothing. It’s whisper quiet. Few things can be more frustrating than a washing machine that isn’t working. There is still hope so don’t curse the gods of machines! For reliable repair services, check out our website.
You can save money by diagnosing the problem. Sometimes the problem is as simple as a squirrel on an electric line. Do you have problems with spinning? Check the switch on the lid. This device can be the culprit. If the switch does not click, your machine will also stop working.
Water problems can be very frustrating. If the drum is not full, your inlet hose could be blocked. If water is flowing easily through the hose, disconnect it and do a quick check. If it is more clogged up than the Don Valley Parkway during rush hour, it should be cleared out. You’re still having trouble? The Grinch could be stealing your wash cycle through the intake valve.
Imagine that your motor isn’t working. Before disassembling the motor, try resetting it. Occasionally, unplugging the device, waiting for 30 seconds and then plugging it back in works. This is similar to turning on your old cranky computer. If that is not enough, you might need expert assistance. Motors can be problematic, much like a cat on an overheated tin roof.
Sometimes washing machines decide to take a stroll. If it is dancing, then the machine is unbalanced. Here’s a tip: make sure all four feet are on the ground. Oops. You can modify them as needed. Add a few towels to balance out the load. The washer has stopped wandering.
Some people swear that vinegar is the best way to remove crud. Even if you find it effective for salad dressings and windows, use caution. Plastic components may deteriorate with too much. You can also use a washer cleaner on occasion. This is like treating your washing machine to a spa.
Do you smell burnt odors from your laundry guards? This should raise red flags. You should remove the plug as quickly as if you were removing your hand from a hot pot. If you do not think Sparky is your alter-ego, it’s best to contact a professional. This could be a malfunctioning electrical system.
Leaks are not to be overlooked. Leakers are like traitors who sabotage quietly from the inside. If you notice standing water near the base of the door, inspect the seal. These seals may crack or deteriorate. Replace it if the hose appears more rigid than frozen noodles. Also, check the hoses; they should be snug as a bug inside a blanket.
Toronto is home to Drake, the Toronto Maple Leafs and some of the most experienced appliance whisperers. Many nearby specialists can perform miracles to save your washer. Ask for advice and read reviews. You can sometimes avoid major problems by listening to the advice of a trusted friend.
If you are a DIY enthusiast, you can find online video tutorials that will guide you through the most common fixes. Be clear: don’t take on more than you can handle. Washing machines can be just as stubborn as a mule.
It is obvious that regular maintenance is worth every penny. Place the washer at a distance of a few inches from the wall to avoid hose kinks. Clean the door seals, and leave the door open after washing to prevent mold. A machine that is happy is not overloaded, so don’t overload it.
Keep these tips in mind next time your washer goes on strike. By exercising patience and elbow grease, you can avoid headaches and protect your wallet. If all else fails, hiring an expert may be the best option. Happy washing to Toronto!